240v Touch Panel 4 zone Wireless Colour controller wall mounted for 12 and 24 volt RGBCCT led strip . This device will fit a 35mm deep wall switch box and has to be used in conjunction with the wireless 4 zone receiver RGBCCT4Z .Up to 4 areas can be controlled on different colours .Each led strip is connected to a 4 zone receiver which is powered by a driver . To Pair a receiver to zone 1 ,switch power off for 10 seconds and then switch on again. When light comes on Tap the Zone 1 button at the top on the (Symbol 1)the lights will flash 3 times slowly and it is then paired. If the lights dont flash 3 times then repeat the process .If the lights flash 10 times quickly they have been unpaired .If so , repeat the same process until they flash 3 times. Requires its own mains feed separate to drivers feed