Led strip RGB joint connector
In stock
Catalogue Number
RGBJC
£1.60
Delivery Time: Next day delivery if ordered before 1.30pm
Led strip joint connector for RGB tape
Enables cut tape to be connected together to form a continuous length
See images and description
12 volts
Please note the image shows a connector for single strip.
Width of connector 14mm
Enables cut tape to be connected together to form a continuous length
See images and description
12 volts
Please note the image shows a connector for single strip.
Width of connector 14mm
Connector to join two pieces of cut RGB led strip to make one continuous length .To connect simply open the connector and place the two tape ends in place and close the snap fit connector..Ensure that tape is cut exactly on the scissor line .The tape slides through the slot in the connector and locates under the 2 contacts in the connector.Once in line with the contacts the lid can be closed. If using a profile , please note the connectors are wider than the led strip so may not fit in your profile.
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|
Write Your Own Review
