Led Strip 20 Watts IP67 Colour Temperature Adjustable 8 Metres
In stock
Catalogue Number
24VIP67LED20CTA8
£115.10
Delivery Time: Next day delivery if ordered before 1.30pm
Commercial Grade 3 Year Warranty Waterproof To IP67 Dimmable Led Strip
Colour temperature adjustable 8 metres length
Self adhesive backing but depending on application extra adhesive may be required
Must be used with a wireless colour temperature adjustable controller and remote control
Any white colour between 3000k and 6500k can be set by using the remote control
24 volt Dc
Led strip 2835 leds
10mm wide LED, 12mm overall
20 watts per metre
2835 leds 120 per metre
Up to 1800 lumens per metre brightness
Requires an led driver
Can be cut every 50mm
Supplied with a 150mm soldered input lead at both ends
CRI 80
We also can provide cut lengths and offer a bespoke service .
Colour temperature adjustable 8 metres length
Self adhesive backing but depending on application extra adhesive may be required
Must be used with a wireless colour temperature adjustable controller and remote control
Any white colour between 3000k and 6500k can be set by using the remote control
24 volt Dc
Led strip 2835 leds
10mm wide LED, 12mm overall
20 watts per metre
2835 leds 120 per metre
Up to 1800 lumens per metre brightness
Requires an led driver
Can be cut every 50mm
Supplied with a 150mm soldered input lead at both ends
CRI 80
We also can provide cut lengths and offer a bespoke service .
Waterproof IP67 Colour temperature adjustable 24 volt led Strip .2835 Self Adhesive 10mm High Output Led Strip.120 leds per metre . This led strip must be connected to a wireless colour temperature adjustable controller .You will also need a suitable 24 volt driver and a remote control . Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Each Length of Tape Comes with a 150mm soldered Input Lead both ends to connect to the driver. We also list cut lengths .We also offer a bespoke service . The strip can be cut every 50mm . Aluminium Profile should be used with this product otherwise your warranty will be void .Aluminium profile has many advantages .
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
A spotless effect can be achieved using a 1715FR2 profile . PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
A spotless effect can be achieved using a 1715FR2 profile . PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| length | 8 |
| Manufacturer | T-Lighting |
Write Your Own Review
