Led Strip 3000k White Per Cut Length 16 Watts
In stock
Catalogue Number
24VLED16WW1
£15.30
Delivery Time: 1-2 Day Delivery
Dimmable Led strip with Self Adhesive back
This strip must be installed within aluminium profile to help with heat dissipation and extended life of the leds
10mm wide
Up to 4 metres length listed but any length or special requirement can be ordered by phone
Warm white 3000K( 2900-3200k CRI80 2835 leds
16 watts per metre
120 leds per metre
1800 lumens per metre
A driver is required to convert from 240v to 24 volt
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 2 metre soldered input lead
3 year warranty
This strip must be installed within aluminium profile to help with heat dissipation and extended life of the leds
10mm wide
Up to 4 metres length listed but any length or special requirement can be ordered by phone
Warm white 3000K( 2900-3200k CRI80 2835 leds
16 watts per metre
120 leds per metre
1800 lumens per metre
A driver is required to convert from 240v to 24 volt
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 2 metre soldered input lead
3 year warranty
Led strip 24 Volt 10mm High Output With warm White 2900-3200K CRI80 Leds .16 Watts Per Metre. 120 leds per metre . .After ordering the strip you will need a suitable driver . Please see our Led drivers for led strip .Each Length of strip Comes with a soldered 2 Metre Input Lead to connect to the driver. We also offer a bespoke service .Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver.
Aluminium Profile should be used with this product otherwise your warranty will be void .Aluminium profile has many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
DIY connectors should not be used with this tape due to its high power rating
Aluminium Profile should be used with this product otherwise your warranty will be void .Aluminium profile has many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
DIY connectors should not be used with this tape due to its high power rating
| Delivery Time | 1-2 Day Delivery |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
Related Products
