Led driver for Led Strip up to 250 watts 24 Volt
In stock
Catalogue Number
P250DRV24
£86.40
Delivery Time: Next day delivery if ordered before 1.30pm
Led driver to run 250 watts of led strip but to prolong the life connect up to 225 watts
250 watt driver
24 volts DC output 10.42 amps
Requires hard wiring to a 240 volt supply
Non Dimmable
3 year warranty
Length 195mm
Width 65mm
Height 31mm
The driver has to be connected by cable to a mains supply between 90 and 265v AC
3 year warranty for piece of mind .
EMI standard EN55015
Safety standard EN61347-1,EN61347-2
ERP Standard EN1194 -2012
Built in PFC function
High Efficiency & low power consumption
Short circuit /Over current/Over voltage protection
Over temperature protection
100% full load burn in
250 watt driver
24 volts DC output 10.42 amps
Requires hard wiring to a 240 volt supply
Non Dimmable
3 year warranty
Length 195mm
Width 65mm
Height 31mm
The driver has to be connected by cable to a mains supply between 90 and 265v AC
3 year warranty for piece of mind .
EMI standard EN55015
Safety standard EN61347-1,EN61347-2
ERP Standard EN1194 -2012
Built in PFC function
High Efficiency & low power consumption
Short circuit /Over current/Over voltage protection
Over temperature protection
100% full load burn in
250 Watt 24 volt led driver to run up to 250 watts of 24 volt led strip. Please note to prolong the life of the driver the total wattage of led strip should not exceed 90% of the rating of driver .For example this driver would ideally run no more than 15 metres of 15 watt strip . The driver has to be connected by cable to a 240 volt supply and hard wired to the led strip.3 year warranty for piece of mind
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
