Led driver for Led Strip up to 18 watts
Out of stock
Catalogue Number
P18DRV12
£9.70
Delivery Time: Next day delivery if ordered before 1.30pm
Led driver to run 18 watts of led strip but to prolong the life connect up to 15 watts
18 watt driver
12 volts Dc output
Input Voltage 240 volts AC
Max current 1.5A
Overall Length 120mm
Width 42mm
Height 20mm
3 year warranty
ROHS Compliance
18 watt driver
12 volts Dc output
Input Voltage 240 volts AC
Max current 1.5A
Overall Length 120mm
Width 42mm
Height 20mm
3 year warranty
ROHS Compliance
18 Watt 12 volt led constant voltage driver to run up to 18 watts of 12 volt led strip.Please note to prolong the life of the driver the total wattage of led strip should not exceed 90% of the rating of driver .For example this driver would ideally run no more than 3 metre of 5 watt strip . The driver has to be connected by cable to a mains supply between 90 and 265v AC .3 year warranty for piece of mind .
EMI standard EN55015
Safety standard EN61347-1,EN61347-2
ERP Standard EN1194 -2012
Built in PFC function
High Efficiency & low power consumption
Short circuit /Over current/Over voltage protection
Over temperature protection
100% full load burn in test
EMI standard EN55015
Safety standard EN61347-1,EN61347-2
ERP Standard EN1194 -2012
Built in PFC function
High Efficiency & low power consumption
Short circuit /Over current/Over voltage protection
Over temperature protection
100% full load burn in test
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
