Led driver for Led Strip up to 40 watts
In stock
Catalogue Number
P40DRV24
£16.60
Delivery Time: Next day delivery if ordered before 1.30pm
Led driver to run 40 watts of led strip but to prolong the life connect up to 36 watts
40 watt driver
24 volts Dc output
Input Voltage 220-240 volts AC
Max current 1.67A
Overall Length 150mm
Width 39mm
Height 27mm
3 year warranty
ROHS Compliance
40 watt driver
24 volts Dc output
Input Voltage 220-240 volts AC
Max current 1.67A
Overall Length 150mm
Width 39mm
Height 27mm
3 year warranty
ROHS Compliance
40 Watt 24 volt led constant voltage driver to run up to 40 watts of 24 volt led strip. Please note to prolong the life of the driver the total wattage of led strip should not exceed 90% of the rating of driver .For example this driver would ideally run no more than 3 metre of 12 watt strip . The driver has to be connected by cable to a mains supply between 220 and 240 AC .3 year warranty for piece of mind .
EMI standard EN55015
Safety standard EN61347-1,EN61347-2
ERP Standard EN1194 -2012
Built in PFC function
High Efficiency & low power consumption
Short circuit /Over current/Over voltage protection
Over temperature protection
100% full load burn in test
EMI standard EN55015
Safety standard EN61347-1,EN61347-2
ERP Standard EN1194 -2012
Built in PFC function
High Efficiency & low power consumption
Short circuit /Over current/Over voltage protection
Over temperature protection
100% full load burn in test
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
