Wireless 4 Zone Receiver for 12 and 24 volt RGB led strip
In stock
Catalogue Number
RGB4Z-S
£16.70
Delivery Time: Next day delivery if ordered before 1.30pm
2.4GHZ Wireless 4 zone RF receiver for RGB led strip 12 and 24 volt
4 Zones
Input/Output 12 - 24 volt
Use with 4 zone remote control for RGB strip which can be purchased separately
Total Output current 12A .Max load per channel 6A
Operating distance up to 30 metres
Multiple receivers can be controlled by one remote together.
Dimensions 73x35x17mm
2 Year warranty
4 Zones
Input/Output 12 - 24 volt
Use with 4 zone remote control for RGB strip which can be purchased separately
Total Output current 12A .Max load per channel 6A
Operating distance up to 30 metres
Multiple receivers can be controlled by one remote together.
Dimensions 73x35x17mm
2 Year warranty
Wireless 4 zone RF Receiver for 12 and 24 volt RGB led strip . This device is connected between RGB led strip and the secondary side of the driver .It is then used with a 4 zone RGB hand held remote to control colours of the led strip light .Operating distance up to 30 metres.One remote can control multiple receivers together on the same zone or on 4 different zones .For example. In a kitchen you may wish to have plinth lighting ,under cabinet lighting ,cupboard lighting and wall lighting on different zones and switched separately but using the same remote. The receiver has a memory function so previous settings will be resumed when powered on again. Also has a dimming function.If you mislay your instructions there is an image of them .
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
