Skip to the beginning of the images gallery

Spotless COB IP67 Led Strip RGB+ 4000k White Per Cut Length 24v

In stock

Catalogue Number

24VIP67COBRGBNW1

£15.50

Delivery Time: 1-2 Day Delivery

Waterproof to IP67 RGBW COB led strip with Self Adhesive backing 24 volt Dimmable Led strip
100% spotless when installed inside a 10mm deep profile with frosted cover
17mm width tape overall
Up to 4 metres length listed but any length or special requirement can be ordered by phone up to 5m
RGB+ white( 4000k )CRI90
18 watts per metre
Requires a 24 volt led driver and receiver
Can be cut every 33mm.
Supplied with a 2 metre soldered input lead
3 year warranty
Click on the instagram link at the bottom of our website to see completed customer projects

Extra Discounts available for large orders, call today!

Details

RGBW COB IP67 waterproof Led strip that has a spotless appearance and achieves 100% tube of light appearance when installed inside a 10mm deep profile with frosted cover .18 Watts Per Metre. RGB+4000k white colour . .After ordering the strip you will need a colour change receiver and suitable driver . Please see our 24 volt Led drivers for led strip .Each Length of strip comes made to length with a soldered 2 Metre Input Lead to connect to the driver. Self adhesive backing.CRI90 .Cut marks every 33mm . Click on the instagram link at the bottom of our website to see completed customer projects . PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED

More Information