Spotless COB Led Strip IP67 3000k White Per Cut Length 24v
In stock
Catalogue Number
24VIP67COB12WW1
£14.90
Delivery Time: 1-2 Day Delivery
Waterproof to IP67 Spotless COB led strip with Self Adhesive backing 24 volt Dimmable Led strip for outdoor use
12mm width tape 6mm Depth. Fits in a 10mm deep profile minimum .
Up to 4 metres length listed but any length or special requirement can be ordered by phone up to 5m
Warm white( 3000k )CRI90
12 watts per metre
1050 lumens per metre
Requires a 24 volt led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm.LOOK CLOSELY FOR CUT MARKS IF CUTTING
Supplied with a 2 metre soldered input lead
3 year warranty
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
For project ideas please click on our instagram link at the bottom of our website
IF YOU CUT THIS STRIP YOUR WARRANTY BECOMES VOID AS YOU WILL BREAK THE IP SEAL.
12mm width tape 6mm Depth. Fits in a 10mm deep profile minimum .
Up to 4 metres length listed but any length or special requirement can be ordered by phone up to 5m
Warm white( 3000k )CRI90
12 watts per metre
1050 lumens per metre
Requires a 24 volt led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm.LOOK CLOSELY FOR CUT MARKS IF CUTTING
Supplied with a 2 metre soldered input lead
3 year warranty
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
For project ideas please click on our instagram link at the bottom of our website
IF YOU CUT THIS STRIP YOUR WARRANTY BECOMES VOID AS YOU WILL BREAK THE IP SEAL.
IP67 COB Led strip that has a spotless appearance and achieves a tube of light appearance with no breaks in light .12 Watts Per Metre. 3000k (2900-3200K) warm white colour . .After ordering the strip you will need a suitable driver . Please see our 24 volt Led drivers for led strip .Each Length of strip comes made to length with a soldered 2 Metre Input Lead to connect to the driver. Self adhesive backing.CRI90 .Look closely for cut marks every 50mm as they are not as obvious as our other tapes .IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
| Delivery Time | 1-2 Day Delivery |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
Related Products
