Led Strip Silicon coated RGB Per Cut Length 7.5 Watts
In stock
Catalogue Number
IPRGB7LED1
£10.50
Delivery Time: 1-2 Day Delivery
Silicon coated IP63 Dimmable Led strip (Not Suitable for outdoor use .See IP67)
10mm wide
Up to 3 metres length listed but any length or special requirement can be ordered by phone
RGB colour change
7.5 watts per metre
30 leds per metre
Requires a wireless colour controller ,remote and NON dimmable led driver
Can be cut every 100mm
Supplied with a 2 metre soldered input lead
Warranty 3 years
We also offer a bespoke service .
10mm wide
Up to 3 metres length listed but any length or special requirement can be ordered by phone
RGB colour change
7.5 watts per metre
30 leds per metre
Requires a wireless colour controller ,remote and NON dimmable led driver
Can be cut every 100mm
Supplied with a 2 metre soldered input lead
Warranty 3 years
We also offer a bespoke service .
12 Volt Self Adhesive 10mm Silicon coated IP63 RGB Led Strip With colour change Leds .7.5 Watts Per Metre. 30 leds per metre . .After ordering the strip you will need to rder a wireless colour controller,remote and a suitable led driver .Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Each Length of Tape Comes with a 1 metre soldered Input Lead to connect to the driver.We also list cut lengths .We also offer a bespoke service . The strip can be cut every 100mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
| Delivery Time | 1-2 Day Delivery |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
Related Products
