Led Strip Waterproof IP67 RGB + 4000k white 10m 24v
In stock
Catalogue Number
24VIP67RGBNW15LED10
£110.10
Delivery Time: Next day delivery if ordered before 1.30pm
Commercial Grade 3 Year Warranty Dimmable Led Strip with self adhesive backing
24 Volt RGBW Led strip with 4000k white
Waterproof to IP67 Dimmable Led strip for wet areas and outdoor use
Colour change leds
14mm wide
10 metres length
14.4 watts per metre
Requires a wireless colour controller , NON dimmable led driver and remote control
See installation diagrams for ideas
Can be cut every 167mm
Supplied with a 150mm soldered input lead
We also list cut lengths and offer a bespoke service .
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
IF YOU CUT THIS STRIP YOUR WARRANTY BECOMES VOID AS YOU WILL BREAK THE IP SEAL.
24 Volt RGBW Led strip with 4000k white
Waterproof to IP67 Dimmable Led strip for wet areas and outdoor use
Colour change leds
14mm wide
10 metres length
14.4 watts per metre
Requires a wireless colour controller , NON dimmable led driver and remote control
See installation diagrams for ideas
Can be cut every 167mm
Supplied with a 150mm soldered input lead
We also list cut lengths and offer a bespoke service .
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
IF YOU CUT THIS STRIP YOUR WARRANTY BECOMES VOID AS YOU WILL BREAK THE IP SEAL.
Waterproof IP67 24 Volt 14mm RGBW 10 Metre Led Strip with colour changing leds and 4000k white .14.4 Watts Per Metre. After ordering the strip you will need a suitable driver , a wireless colour controller and a hand held remote control . Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Each Length of Tape Comes with a 50mm soldered Input Lead to connect to the driver.We also list cut lengths .We also offer a bespoke service .The strip can be cut every 167mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink .IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink .IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| length | 10 |
| Manufacturer | T-Lighting |
Write Your Own Review
