Led Strip Spotless COB Waterproof IP68 9.6 Watts 4000k White 5 Metres 24V
In stock
Catalogue Number
24VIP68COB10NW5
£86.40
Delivery Time: Next day delivery if ordered before 1.30pm
Commercial Grade 2 Year Warranty Dimmable Led COB with self adhesive backing
Waterproof To IP68
Output 24 Volt Dc
5 metres length 10mm overall width . 4mm Deep
White 4000k
CRI 90
9.6 watts per metre
Spotless COB
970 lumens per metre
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 150mm soldered input lead at one end. br>We also offer a bespoke service.Please call or email for details
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
.Please note all accessories are only IP67 so cannot be submerged in water for over 30 minutes .
Waterproof To IP68
Output 24 Volt Dc
5 metres length 10mm overall width . 4mm Deep
White 4000k
CRI 90
9.6 watts per metre
Spotless COB
970 lumens per metre
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 50mm
Supplied with a 150mm soldered input lead at one end. br>We also offer a bespoke service.Please call or email for details
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
.Please note all accessories are only IP67 so cannot be submerged in water for over 30 minutes .
Waterproof to IP68 24 Volt 10mm wide 4mm deep 5 Metre Led Spotless COB With 4000k White Leds and self adhesive backing .9.6 Watts Per Metre. 480 leds per metre . After ordering the tape you will need a suitable 24 volt driver . Each Length of COB Tape Comes with a 150mm soldered Input Lead to connect to the driver. We also offer a bespoke service . The strip can be cut every 50mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP68 CAN BE SUBMERGED UNDER WATER . IF CUTTING AND USING THE CORNER AND INPUT ACCESSORIES THESE ARE ONLY IP67 SO CANNOT BE SUBMERGED FOR MORE THAN 30 MINUTES.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP68 CAN BE SUBMERGED UNDER WATER . IF CUTTING AND USING THE CORNER AND INPUT ACCESSORIES THESE ARE ONLY IP67 SO CANNOT BE SUBMERGED FOR MORE THAN 30 MINUTES.
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| length | 10 |
| Manufacturer | T-Lighting |
Write Your Own Review
Related Products
