Led Strip IP67 4000k White Per Cut Length 4.8 Watts 24v
In stock
Catalogue Number
24VIP67LED5NW1
£12.70
Delivery Time: 1-2 Day Delivery
Commercial grade 3 year warranty 24 volt Waterproof to IP67 Dimmable Led Strip for outdoor use with self adhesive backing
10mm overall width
Up to 5 metres length listed but any length or special requirement can be ordered by phone
Neutral white( 4000k )3528 leds
4.8 watts per metre
60 leds per metre .540 lumens
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 100mm
Supplied with a 2 metre soldered input lead
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
IF YOU CUT THIS STRIP YOUR WARRANTY BECOMES VOID AS YOU WILL BREAK THE IP SEAL.
10mm overall width
Up to 5 metres length listed but any length or special requirement can be ordered by phone
Neutral white( 4000k )3528 leds
4.8 watts per metre
60 leds per metre .540 lumens
Requires an led driver
When dimming from a wall switch dimmer a dimmable driver must be used
Can be cut every 100mm
Supplied with a 2 metre soldered input lead
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
IF YOU CUT THIS STRIP YOUR WARRANTY BECOMES VOID AS YOU WILL BREAK THE IP SEAL.
Led Strip IP67 Waterproof Neutral white 24 Volt 10mm 4.8 Watts Per Metre. 60 leds per metre with self adhesive backing . .After ordering the strip you will need a suitable driver . Please see our Led drivers for led strip .Each Length of strip Comes with a soldered 2 Metre Input Lead to connect to the driver. We also offer a bespoke service . The strip can be cut every 100mm . Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver.Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
1707FR profile is perfect housing for this Led strip . PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
1707FR profile is perfect housing for this Led strip . PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
| Delivery Time | 1-2 Day Delivery |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
