LED Strip Waterproof IP68 RGB+3000K 10 Metres 24V
In stock
Catalogue Number
24VIP68RGBWW10
£190.50
Delivery Time: Next day delivery if ordered before 1.30pm
Commercial Grade 2 Year Warranty Dimmable Colour change LED with self adhesive backing
Waterproof To IP68
Output 24 Volt Dc
10 metres length
17mm overall width with end cap included
5mm Deep
RGB +3000K white
CRI 90
LED strip operating temperature -20°c to 60°c
16 watts per metre
60 LEDs Per metre
Requires an LED driver and colour change receiver
Can be cut every 100mm
Supplied with a 150mm soldered input lead
We can also provide a bespoke service of any length up to 10metres . Please call or email for details
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
The LED can be submerged less then 1m but connections must be outside of the water
1 Year warranty for underwater application.
Waterproof To IP68
Output 24 Volt Dc
10 metres length
17mm overall width with end cap included
5mm Deep
RGB +3000K white
CRI 90
LED strip operating temperature -20°c to 60°c
16 watts per metre
60 LEDs Per metre
Requires an LED driver and colour change receiver
Can be cut every 100mm
Supplied with a 150mm soldered input lead
We can also provide a bespoke service of any length up to 10metres . Please call or email for details
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
The LED can be submerged less then 1m but connections must be outside of the water
1 Year warranty for underwater application.
Waterproof to IP68 24 Volt 17mm wide 5mm deep 10 Metre LED RGB +3000k white with self adhesive backing . 16 Watts Per Metre. 60 leds per metre . After ordering the tape you will need a suitable 24 volt driver and colour change receiver . Each Length of Tape Comes with a 150mm soldered Input Lead to connect to the driver. We also offer a bespoke service of any cut length up to 5 metres . . The strip can be cut every 100mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP68 CAN BE SUBMERGED UNDER WATER .
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP68 CAN BE SUBMERGED UNDER WATER .
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
