Please Note: We will be closed between 29th March and 1st April.
Any orders placed after the 27th March will be delivered from 2nd/3rd April onwards.

Led Strip IP67 24V RGB Per Cut Length 7.5 Watts

In stock
Catalogue Number
24VIP67RGB7LED1
£17.20

Delivery Time: 1-2 Day Delivery

Fully waterproof to IP67 RGB Dimmable Led strip
Led Strip in waterproof tube not silicon coated
12mm wide . 5mm Thick
Up to 10 metres in length .Other lengths can be requested
RGB colour change
7.5 watts per metre
30 leds per metre
Requires a wireless colour controller ,remote and NON dimmable led driver
Can be cut every 167mm
Supplied with a 2 metre soldered input lead
Warranty 3 years
.
IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION.
Extra Discounts available for large orders, call today!
IP67 waterproof RGB Led Strip With colour change Leds .7.5 Watts Per Metre. 30 leds per metre . .After ordering the strip you will need to order a wireless colour controller,remote and a suitable led driver .Please note that to prolong the life of the driver ,the total of led strip wattage should be no more than 90% of the rating of driver. Each Length of led strip comes with a 2 metre soldered Input Lead to connect to the driver. The strip can be cut every 167mm . Using Aluminium Profile with the led strip provides many advantages.
It stops the strip from coming unstuck after time .
It diffuses and spreads the light
It prevents damage to leds when cleaning off dust etc
It prolongs the life of the led by acting as a heat sink .IF PROFILE IS NOT USED YOU WILL PROBABLY NEED ADDITIONAL ADHESIVE DEPENDING ON THE APPLICATION. PLEASE NOTE IP67 IS NOT SUITABLE TO BE INSTALLED WHERE IT WILL BE SUBMERGED UNDER WATER FOR MORE THAN 30 MINUTES SUCH AS PATIO FLOOR OR DRIVEWAYS. IF THE WATER WONT DRAIN AWAY WITHIN 30 MINUTES AN IP68 SHOULD BE USED
More Information
Delivery Time 1-2 Day Delivery
Manufacturer T-Lighting
Write Your Own Review
You're reviewing:Led Strip IP67 24V RGB Per Cut Length 7.5 Watts
Your Rating